Operation Manual – SSL-HTTPS
H3C S3610&S5510 Series Ethernet Switches
Associating the HTTPS Service with a Certificate Attribute
Access Control Policy
Associating the HTTPS Service with an ACL
2.3 Associating the HTTPS Service with an SSL Server Policy
You need to associate the HTTPS service with a created SSL server policy before
enabling the HTTPS service.
Follow these steps to associate the HTTPS service with an SSL server policy:
Enter system view
Associate the HTTPS
service with an SSL
server policy
Note:
If the ip https ssl-server-policy command is executed repeatedly, the HTTPS
service is only associated with the last specified SSL server policy.
When the HTTPS service is disabled, the association between the HTTPS service
and the SSL server is automatically removed. To enable it again, you need to
re-associate the HTTPS service with an SSL server policy.
When the HTTPS service is enabled, no modification of its associated SSL server
policy takes effect.
2.4 Enabling the HTTPS Service
Before configuring the HTTPS, make sure that the HTTPS server is enabled.
Otherwise, other related configurations cannot take effect.
Follow these steps to enable the HTTPS service:
Enter system view
Enable the HTTPS
service
Configuration task
To do...
system-view
ip https
ssl-server-policy
policy-name
To do...
system-view
ip https enable
Use the command...
Use the command...
2-2
Chapter 2 HTTPS Configuration
Remarks
Optional
Optional
Remarks
—
Required
Not associated by default
Remarks
—
Required
Disabled by default.