Display Of Servopack And Servomotor Id (Fn01E) - YASKAWA SGMJV User Manual

6 Utility Functions (Fn)

6.17 Display of SERVOPACK and Servomotor ID (Fn01E)

This function displays ID information for SERVOPACK, servomotor, encoder, and option module connected
to the SERVOPACK. The ID information of some option modules (SGDV-OFA01A) is not stored in the SER-
VOPACK. "Not available" will be displayed for these option modules.
The digital operator (model: JUSP-OP05A-1-E) or SigmaWin+ engineering tool is required to execute this
function.
Refer to
procedure of the digital operator.
The following items can be displayed.
SERVOPACK ID
Servomotor ID
Encoder ID
Safety Option Module
*
ID
Feedback Option Mod-
ule ID
∗
If the option module is not connected, "Not connect" will be displayed after the module name.
(1) Preparation
There are no tasks that must be performed before the execution.
6-28
Σ
-V Series User's Manual, Operation of Digital Operator (No.: SIEP S800000 55) for the operating
ID
• SERVOPACK model
• SERVOPACK serial number
• SERVOPACK manufacturing date
• SERVOPACK input voltage (V)
• Maximum applicable motor capacity (W)
• Maximum applicable motor rated current (Arms)
• Servomotor model
• Servomotor order number
• Servomotor manufacturing date
• Servomotor input voltage (V)
• Servomotor capacity (W)
• Servomotor rated current (Arms)
• Encoder model
• Encoder serial number
• Encodermanufacturing date
• Encoder type/resolution
• Safety Option Module model
• Safety Option Module serial number
• Safety Option Module manufacturing date
• Safety Option Module ID number
• Feedback Option Module model
• Feedback Option Module serial number (Reserved area)
*
• Feedback Option Module manufacturing date
• Feedback Option Module ID
Items to be Displayed