2 Panel Display and Operation of Digital Operator
2.4.3 Setting Parameters
Step
9
(2) How to Select Functions Using Parameters
The following example shows how to set the function section for insufficient voltage of the application func-
tion select switch 8 (Pn008) to 1
Step
1
2
3
4
5
6
7
8
9
2-6
Display after Operation
"detects warning and limits torque by host controller."
Display after Operation
Keys
Press the
Key to write the settings.
Keys
Press the
eters and monitor displays.
Press the
"Un."
Press the
Press the
the column on the right of "Pn."
Press the
Press the
Press the
"Pn008.1."
Press the
to "1."
Press the
Operation
Operation
Key to select the main menu of param-
or
Key to move the cursor to
or
Key to change "Un" to "Pn."
Key three times to move the cursor to
Key to display "Pn008."
Key to move the cursor to "Pn008.0."
Key once to move the cursor to
Key to change the setting of "Pn008.1"
Key to write the settings.
(cont'd)