YASKAWA SGMJV User Manual page 349

10 Appendix
Parameter
Size
No.
2 Input Signal Selection 1
4th 3rd 2nd 1st
digit digit digit digit
n.    
Pn50A
10-16
Setting
Name
Range
0000 to FFF1
Reserved (Do not change.)
Reserved (Do not change.)
Reserved (Do not change.)
P-OT Signal Mapping
0 Forward run allowed when CN1-13 input signal is ON (closed).
1 Forward run allowed when CN1-7 input signal is ON (closed).
2 Forward run allowed when CN1-8 input signal is ON (closed).
3
Forward run allowed when CN1-9 input signal is ON (closed).
4 Forward run allowed when CN1-10 input signal is ON (closed).
5 Forward run allowed when CN1-11 input signal is ON (closed).
6 Forward run allowed when CN1-12 input signal is ON (closed).
7 Forward run prohibited.
8
Forward run allowed.
9 Forward run allowed when CN1-13 input signal is OFF (open).
A Forward run allowed when CN1-7 input signal is OFF (open).
B Forward run allowed when CN1-8 input signal is OFF (open).
C Forward run allowed when CN1-9 input signal is OFF (open).
D
Forward run allowed when CN1-10 input signal is OFF (open).
E Forward run allowed when CN1-11 input signal is OFF (open).
F Forward run allowed when CN1-12 input signal is OFF (open).
Factory When
Units
Setting Enabled
−
1881 After restart
(cont'd)
Reference
Classification
Section
−
Setup
Reference
Section
4.3.2