YASKAWA SGMJV User Manual page 339

10 Appendix
Parameter
Size
No.
Application Function Select
2
Switch B
4th 3rd 2nd 1st
digit digit digit digit
n.    
Pn00B
Application Function Select
2
Switch C
4th 3rd 2nd 1st
digit digit digit digit
n.    
Pn00C
Application Function Select
2
Switch D
4th 3rd 2nd 1st
digit digit digit digit
n.    
Pn00D
10-6
Setting
Name
Range
0000 to 1111
Parameter Display Selection
0 Setup parameters
1 All parameters
Alarm Gr.2 Stop Method Selection
0 Stops the motor by setting the speed reference to "0".
1 Same setting as Pn001.0 (Stops the motor by applying DB or by coasting).
Power Supply Method for Three-phase SERVOPACK
0
Three-phase power supply
1 Single-phase power supply
Reserved (Do not change.)
0000 to 0111
Selection of Test without a Motor
0 Disables test without a motor.
1 Enables test without a motor.
Encoder Resolution for Test without a Motor
0 13 bits
1 20 bits
Encoder Type for Test without a Motor
0 Incremental encoder
1 Absolute encoder
Reserved (Do not change.)
0000 to 1001
Reserved (Do not change.)
Reserved (Do not change.)
Reserved (Do not change.)
Overtravel Warning Detection Selection
0 Does not detect overtravel warning.
1 Detects overtravel warning.
Factory When
Units
Setting Enabled
−
0000 After restart
−
0000 After restart
−
0000 Immediately
(cont'd)
Reference
Classification
Section
−
Setup
Reference
Section
2.4.1
Reference
Section
4.3.5
Reference
Section
3.1.3
4.5,
Setup
4.5.1
Setup –
Reference
Section
4.3.2