Bioscrypt 3G Series Readers; V-Pass Fx And V-Stationa - Lenel OnGuard Hardware Installation Manual

116

Bioscrypt 3G Series Readers

This section is intended for the use of the Bioscrypt VeriSeries 3G Series product line, including the V-Pass
FX, V-StationA, V-StationG/H, and V-Smart hardware products.
116.1

V-Pass FX and V-StationA

The V-Pass FX is a fingerprint reader. To use this reader, it must be configured as an alternate reader and
linked (through the software) to a primary reader. This is necessary for door control. Controller-based
templates are used, so verification occurs through comparing the fingerprint with the biometric data (called a
template) stored on the ISC.
V-Pass FX readers interface upstream with the Biometric Reader Interface Gateway (LNL-500B). It can also
interface with the intelligent dual reader controller (LNL-2220), intelligent single door controller
(LNL-2210), or series 2 reader interface modules (LNL-1300, LNL-1320). Multiple V-Series devices may
be connected in a single network.
Hardware Installation Guide
621
revision 7 —