Lenel OnGuard Hardware Installation Manual page 344

LNL-1300 Single Reader Interface Module
1
Supervised 4-State F/2F Reader Edge Wiring Callouts
Callout Description
1 Supervised F/2F reader
2 TB4 on LNL-1300
3 TB4-1: Ground connection
4 TB4-2: Buzzer terminal to Reader DO (GREEN LED) connection
5 For Supervised F/2F readers: Install jumper between D1 and LED terminals.
6 TB4-4: Reader Data 1 connection
7 TB4-6: +12 VDC connection
8 Normally Closed contact for door monitor switch
9 Normally Open contact for REX switch
Typical Supervised F/2F Board Edge Inputs
When the "Supervised F/2F Board Edge Inputs" Output type is configured, the door contact and REX are
terminated on the LNL-1300 inputs.
344 —
revision 7
Supervised 4-State F/2F Reader Edge Wiring
3
4
5
6
7
2
8
9