28.3
Default Settings
Each board ships with the following default configuration.
•
All DIP switches are off.
•
IP Addressing: DHCP
•
DNS Name: "MAC" followed by the 12-character MAC address.
•
Device address: 0. This must match the setting in System Administration for successful IP or serial
communications
•
Primary host port: Ethernet (serial port is disabled)
•
Serial port settings: No flow control
•
Data security: None
•
Baud Rate: 9600
•
Login Name: admin
•
Login Password: password (The password is case-sensitive.)
28.4
Default Login Security Enhancements
With firmware version 1.194 or later, security enhancements were made regarding the default login account.
These enhancements restrict the conditions in which the default login account is enabled, exposing the Lenel
controllers to unauthorized access. For more information, refer to Default Login Security Enhancementson
page 117.
Hardware Installation Guide
147
revision 7 —