Mounting - Lenel OnGuard Hardware Installation Manual

FIELD HARDWARE POWER SUPPLIES AVAILABLE
LNL-AL600ULX-4CB6
LNL-600X6-CE220
LNL-CTX
LNL-CTX-6
ABT-12
For a complete listing of our products, consult the Lenel Price Book.
2.2

Mounting

Most modules are 6 x 8 inches in size, with mounting holes along the long edge. Up to two (2) units can be
mounted in a single LNL-CTX enclosure. The LNL-CTX-6 allows for up to six (6) modules.
UL Listed power supply - 12 VDC (6A output, 9.7 - 13.5 VDC, 12 VDC
nominal), 120 VAC input, continuous supply current with enclosure, lock,
UPS capable (battery optional). Operating temperature: 0° to +49° C (32° to
120° F). Humidity: 0 to 85% RHNC. BTU output: 49 BTU.
CE marked power supply - 12 VDC (6A output), 230 VAC input, continuous
supply current with enclosure, lock, UPS capable (battery optional).
Operating temperature: 0° to +49° C (32° to 120° F). Humidity: 0 to 85%
RHNC. BTU output: 49 BTU.
Hardware enclosure (12 x 16 x 4.5 inches [304.8 x 406.4 x 114.3 mm]) with
lock and tamper switch support up to two Lenel access hardware modules
(UL approved).
Hardware enclosure (18 x 24 x 4.5 inches [457.2 x 609.6 x 114.3 mm]) with
lock and tamper switch support up to six Lenel access hardware modules (UL
approved).
Battery Kit, 12 VDC, 12AH Battery (PS-12120).
Hardware Installation Guide
revision 7 —
29