Lenel OnGuard Hardware Installation Manual page 129

Supervised F/2F Wiring (Reader Port 2) Callouts
Callout Description
1 Supervised F/2F reader
2 TB3 and TB4 on LNL-2210
3 For Supervised F/2F readers: Install jumper between D1 and LED terminals.
4 TB4-1: +12 VDC connections
5 TB3-2: Buzzer terminal to Reader DO (GREEN LED) connection
6 TB3-3: Reader Data 1 connection
7 TB4-2: Ground connection
Typical Supervised F/2F Board Edge Inputs
When the "Supervised F/2F Board Edge Inputs" Output type is configured in System Administration, then
door contact and REX are terminated on the LNL-2210 inputs.
Supervised F/2F Wiring (Reader Port 2)
2
3
Hardware Installation Guide
4
5
6
7
1
129
revision 7 —