Overview - Lenel OnGuard Hardware Installation Manual

Hardware Installation Guide
94

Overview

This installation guide is intended for use by technicians who will be installing and maintaining
LNL-2005W Magnetic Card Access Readers.
OnGuard Magnetic Card Access Readers are durable, dependable, convenient and competitively priced. The
Magnetic Card Access Readers are available in both 5 VDC and 12 VDC models. The reader's are in fully
weatherized metal casing shells, which provide strength and durability. The readers are first treated with an
anti-corrosion film and then coated with a tough abrasion resistant finish, available with a beige or black
textured finish, which compliments any interior or external decor. The readers accept low and high
coercivity magnetic stripe cards. Track 2 magnetic readers are standard with optional Track 1 or Track 3
readers available.
The reader communicates to the Intelligent System Controller (ISC) through one of two reader interface
modules. The single or dual reader interface modules interpret the Wiegand communication (Data 1/Data 0
or Clock and Data) from the reader and sends the signal via RS-485 back to the ISC. The reader can be
located up to 500 feet away from the reader interface module.
463
revision 7 —