Table of Contents
Advertisement
LNL-1200-U Output Control Module
reflection and external noise coupling. Each component provided has an on-board terminator.
The installer should determine which device is at the end of the communication line.
60.3
Relay Outputs
The Output Control Module contains sixteen (16) form-C dry-contact relay outputs, Relay 1 through 16
(K1-K11 & K16-K20). Each provides up to 5A 30VDC.
Transient clamping must be provided to protect the output contacts and to reduce EMI emissions.
For AC-powered devices, use MOV across the load. For DC-powered devices, use a diode across the load.
328 —
revision 7
Relay contact (DC strike)
Advertisement
Table of Contents
