Opencard Xf1050-K - Lenel OnGuard Hardware Installation Manual

Lenel OpenCard Readers
104.2

OpenCard XF1050-K

OpenCard XF1050-K Reader Power Specifications
Model
OpenCard XF1050-K
104.2.1 Wiring the LNL-1300
From LNL-1300
Reader Pin
Terminal
GND
BZR
LED
TB4
CLK D1
DAT D0
V0
Note: Connect reader's cable drain shield to earth ground.
104.2.2 Wiring the LNL-1320
From LNL-1320
Reader 1 or Reader 2 Pin
GND
DAT D0
CLK D1
BZR
LED
V0
Note: Connect reader's cable drain shield to earth ground.
540 —
revision 7
Voltage
5 to 16 VDC
To OpenCard XF1050-K Reader
Wire Description
Black Ground
Brown Red LED
Orange Green LED
White Data/D1
Green Clock/D0
Red Power (5-12 VDC)
To OpenCard XF1050-K Reader
Wire
Black
Green
White
Brown
Orange
Red
Current
110 mA average,
160 mA peak
Typical Software Settings
• Reader Type = Wiegand/Prox
• LED Mode = 2-Wire LED
Control
Typical Software Settings
Description •
Ground
•
Clock/D0
Data/D1
Red LED
Green LED
Power (5-12 VDC)
Reader Type =
Wiegand/Prox
LED Mode = 2-Wire
LED Control