Table of Contents
Advertisement
Characters " , \, &, = and % are invalid characters and cannot be used for passwords.
c.
Specify the Session Timer (5 to 60 minutes). Click [Save].
d.
You may disable the web server by selecting the check box. When this option is selected and SW1
is off, all ports except for the host communication port will be disabled. The configuration web
page cannot be used to access the device.
e.
Select the Enable door forced open filter check box if you do not want a forced open alarm
generated if the door is opened within three seconds of it being closed.
8.
For configuration of auto-save, click [Auto-Save].
a.
On this page, you may restore the last save or clear all the settings.
b.
Choose to disable or enable Auto-Save. If Auto-Save is enabled, volatile memory is written to
flash. The frequency of this action is specified in the timer (30 seconds to 30 minutes). Click [Save
Settings].
9.
You may click [Restore/Default] if you need to reload the factory settings or the current operating
settings.
10. When you have completed configuring the device, click [Apply Settings], [Apply Settings, Reboot], and
then [Log Out].
24.7
Additional Mounting Information
Sources for the items shown below:
•
3-gang stainless steel blank cover: Leviton part number 84033-40. Available from Graybar, part number
88158404
•
Magnetic switch set: G.R.I. part number: 505
BLANK
COVER W/SCREWS
MAGNETIC
TAMPER SWITCH
JUNCTION BOX
TO ETHERNET
NETWORK
Side view
3-GANG
Hardware Installation Guide
2210 WITH INCLUDED
MOUNTING PLATE
FIELD WIRING
137
revision 7 —
Advertisement
Table of Contents
