Table of Contents
Advertisement
LNL-4420 Intelligent Dual Reader Controller
3.
To configure the connection settings to the pivCLASS PACS service, click [pivCLASS-Embedded-
Auth]. The pivCLASS Embedded Authentication settings page is displayed.
4.
Configure the server address, server port address, and enable encryption communication, if required.
For more information, refer to the "FIPS 201 Credentials Folder" in the System Administration User
Guide.
5.
Specify the location of the database as either on the filesystem or on the SD Secure Digital card. Use the
SD card if you need more room for the database.
6.
Click [Test Connection] to verify you can successfully connect to the server.
7.
When you have completed configuring the connection, log off the panel Web page.
202 —
revision 7
Advertisement
Table of Contents
