Lenel OnGuard Hardware Installation Manual page 219

Hardware Installation Guide
12. Disconnect Time = 00:00
13. Send Char 1 = 00
14. Send Char 2 = 00
When these changes have been made, type '9' at the main screen to save the changes and exit. The changes
will be stored in the CoBox Micro 100 and the connection will be terminated.
To verify that the changes were stored correctly, cycle the power on the CoBox Micro 100 and when it has
rebooted, go to the command prompt and Telnet to the IP Address that was just given to the device and port
9999 (example: TELNET 192.168.2.203 9999).
The configuration page will display a summary of current settings. Verify that all settings are configured
properly and exit the Telnet session.
219
revision 7 —