Table of Contents
Advertisement
LNL-2010W/2020W/2020W-NDK/NDKV2 Magnetic Card Access Reader
101
Specifications
The reader is for use in low voltage, class 2 circuits only.
Power:
Voltage
Current
Data output
Data 1/0 pair or clock/data
Timing - clock/data -
- data 1/0 -
LED input
input not driven: LEDs off
input > 3.5 VDC: Red LED on
input < 0.8 VDC: Green LED on
Buzzer input:
input not driven or > 3.5 VDC: buzzer
off
input < 0.8 VDC: buzzer on
Mechanical
Dimension
Weight
Material
Card
75 bpi, ANSI X4.16, Track 2 standard,
Speed 3 to 50 ips
Read Head
500,000 passes typical, standard.
Optional high-wear head available.
Tamper
(Optional)
Switch
Distance
500' (152m) with 18 AWG wires
Environmental
Temperature:
Humidity:
Certifications
UL294 and UL1076 Listed, CE marking, RoHS compliant
488 —
revision 7
5 Volt Model: 5.8 VDC (4.9 to 6.4 VDC)
12 Volt Model: 12 VDC (10.2 to 13.8 VDC)
80mA (25mA typical.)
1 mS period
400 uS setup/hold time typical
3 mS period
20 μS pulse width typical
1.95 W x 1.30 H x 5.50 L inches
(50 W x 33 H x 140 L mm)
10 oz. (284 g) nominal
Case, Die cast aluminum, gray powder coat
standard
Mounting, stainless steel
Wall plate, 18 CRS, gray powder coat
standard
To order the high-wear read head, add
"-OH" to the part number when you place
your reader order.
To order the tamper switch, add "-OT" to
the part number when you place your reader
order.
Operating: -40° to +75° C (-40° to +167° F)
0-95% RHNC, standard
100% (-OW option)
Advertisement
Table of Contents
