Wiring Procedure - Mitsubishi A953GOT-SBD-M3-H Hardware Manual

A953 HANDY GOT

Wiring procedure

The work procedures from starting up to making ready the Handy GOT using this manual are
explained below.
Outline
1
1.2 Product configuration
Introduces the model name expression of the Handy GOT and accessories.
1.3 Introduction of cables and screen creation software (options) and
their applications
Introduces optional products (cables and connector conversion box) and explains their easy
applications.
1.4 Part identification
Explains the name and function of switches, lamps and connectors of the Handy GOT.
1.5 Applicable versions of OS and screen creation software
Explains versions of the system program (OS) and the screen creation software which are
compatible with the Handy GOT and to be prepared.
Outline of connection
2
2.2.1 Outline of connection
Introduces configurations in accordance with applications.
2.2.2 Cable selection
Introduces combinations of cables between the Handy GOT and the PLC.
2.2.3 Pin arrangement and signal names of cables and connectors
Explains signal names of external cables and connector conversion box.
Installation
3
2.1 Installation method
Introduces how to fix or hold by hand the Handy GOT.
2.2.4 Connection of external cable
Explains how to let an external cable go through the cable mounting slot of the Handy GOT and
fix it with screws.
2.3 Panel face processing
Introduces cables and connector box and explains the panel cut size for cases in which the
Handy GOT is attached to and detached from the panel face.
Reference page
1-3
1-4
1-5
1-7
Reference page
2-5
2-7
2-8
Reference page
2-1
2-9
2-12
x