Ip Rip Authentication; Ip Rip Receive Version - Hirschmann PowerMICE Reference Manual

Format
Mode
4.6.7.2 no default-information originate
This command is used to control the advertisement of default routes.
Format
Mode

4.6.8 ip rip authentication

This command sets the RIP Version 2 Authentication Type and Key for the specified interface. The
value of <
The value for authentication key [
displayable, non-control keystrokes from a Standard 101/102-key keyboard. If the value of <
encrypt, a keyid in the range of 0 and 255 must be specified.
Default
Default
Default
Format
Mode
4.6.8.1 no ip rip authentication
This command sets the default RIP Version 2 Authentication Type for an interface.
Format
Mode

4.6.9 ip rip receive version

This command configures the interface to allow RIP control packets of the specified version(s) to be
received.
The value for <
version 2, both to receive packets from either format, or none to not allow any RIP control packets to
be received.
Default
Format
Mode
4.6.9.1 no ip rip receive version
This command configures the interface to allow RIP control packets of the default version(s) to be
received.
© 2001- 2006 Hirschmann Automation and Control GmbH. All Rights Reserved.
no distribute-list <1-199> out {ospf | bgp | static | connected}
Router RIP Config
no default-information originate
Router RIP Config
> is either none, simple, or encrypt.
type
key
The default authentication type is none.
The default password key is an empty string. Unauthenticated interfaces do not need an authen-
tication key.
The default key id is not defined. Unauthenticated interfaces do not need an authentication key
id.
ip rip authentication {none | {simple <key>} | {encrypt <key>
<keyid>}}
Interface Config
no ip rip authentication
Interface Config
> is one of: rip1 to receive only RIP version 1 formatted packets, rip2 for RIP
mode
both
ip rip receive version {rip1 | rip2 | both | none}
Interface Config
] must be 16 bytes or less. The [ ] is composed of standard
key
type
> is
38