Installation Procedure; Installing Hipath 3750 - Siemens HiPath 3000 Service Manual

inst_h3.fm
Installing HiPath 3000
Installing HiPath 3750, HiPath 3700
4.3.2

Installation Procedure

Table 4-10 HiPath 3750, HiPath 3700 - System Installation Procedure
Step

Installing HiPath 3750

1. Selecting the Installation Site, page 4-87
(usually predetermined)
2. Unpacking the Components, page 4-89 Unpacking the Components, page 4-128
3. Install MDFU or MDFU-E (not for USA),
4. Setting up the System Cabinets (from
Single Cabinet
Two cabinets (stacked)
Two cabinets (side by side)
Three cabinets (stacked)
5. Grounding the System, page 4-106
Checking the Grounding, page 4-111
6. Connecting the Cable to the Backplane,
7. Laying the Line Network and Setting
Jumpers on the MDFU or MDFU-E, page
8. Loading the System Software and Installing Subboards on the CBCPR, page 4-151
9. Configuration notes, page 4-152 (cabinet(s) are already equipped with the boards)
10.
4-84
Installation Activity
page 4-90
Page 4-91):
page 4-112
4-122
Connecting Workpoint Clients, page 4-161
Installing HiPath 3700 (19-Inch Cabi-
Selecting the Installation Site, page 4-128
(generally determined by the existing 19-
inch cabinet)
Mounting the System Cabinet in the 19-
Inch Cabinet, page 4-129
Mounting the Patch Panel in the 19-Inch
Cabinet, page 4-133
Grounding the System, page 4-134
Checking the Grounding, page 4-136
Connecting the Cable to the Backplane,
page 4-137
Connecting the Line Network to the Patch
Panel, page 4-150
P31003-H3550-S403-4-7620, 02/05
HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual
net)