Installing Hipath 3500 And Hipath 3300 (19-Inch Housing); Installation Versions - Siemens HiPath 3000 Service Manual

Hide thumbs Also See for HiPath 3000:

Table of Contents

Installing HiPath 3000

Installing HiPath 3550, HiPath 3350, HiPath 3500, and HiPath 3300

Installing HiPath 3500 and HiPath 3300 (19-Inch Housing)

This section contains information on how to install the HiPath 3500 and HiPath 3300 19-inch

housing. This chapter describes the standard installation procedures for the basic system. Re-

fer to Chapter 9 for information about supplementary equipment and expansions.

The HiPath 3500 and HiPath 3300 systems can only be operated with a closed hous-

Before opening the housing, make sure that the system is de-energized as follows:

Disconnect the line cord on any connected battery pack (for UPSC-DR only).

Disconnect the line cord on any connected EPSU2-R (for UPSC-DR only).

Disconnect the power plug.

HiPath 3500 and HiPath 3300 are designed for the following three installation variants:

Wall mounting (with assembly kit 39165-A7027-D2)

Desk installation (assembly kit includes adhesive feet 39165-A7027-D2.)

Stick the adhesive feet to the bottom of the housing.

Installation in the 19-inch cabinet (with assembly kit 39165-A7027-D1 for HiPath 3500, as-

sembly kit 39165-A7027-D4 for HiPath 3300)

You can also install an ECR expansion cabinet rack in which you can install a battery pack (for

uninterruptible power supply) and/or an additional external power supply EPSU2-R (if the sys-

tem's internal power supply is not sufficient) (see Section 9.2.4).

P31003-H3550-S403-4-7620, 02/05

HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual

Table of Contents