Safety Information: Warnings - Siemens HiPath 3000 Service Manual

Hide thumbs Also See for HiPath 3000:
Table of Contents

Advertisement

inform.fm
Important Information
Safety Information
1.4.2

Safety Information: Warnings

Replacing the lithium battery
There is a risk of explosion if a lithium battery is not correctly replaced. It must only be replaced
by an identical battery or one recommended by the manufacturer.
Replacing the batteries (DC power supply)
Procedures to be observed are described in the relevant chapters.
Protective clothing and equipment
Do not wear loose clothing; tie back your hair while working on machines.
Never wear rings, watches, and other jewelry or even clothing with metal coating or rivets
when working with electrical circuits and components. These could cause injury and short
circuits.
Wear eye protection when you are working in any conditions that might be hazardous to
your eyes.
Always wear a hard hat where there is a risk of injury from falling objects.
General safety
The surface of a mirror is conductive. Do not touch powered circuits with a mirror. To do so
can cause personal injury and machine damage.
Disconnect all power before working near power supplies unless otherwise instructed by a
maintenance procedure.
Do not attempt to lift objects that you think are too heavy for you.
Never look directly at a laser beam.
1-8
P31003-H3550-S403-4-7620, 02/05
HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hipath 5000

Table of Contents