Attendant Console Versions; Optipoint Attendant - Siemens HiPath 3000 Service Manual

Hide thumbs Also See for HiPath 3000:

Table of Contents

Workpoint Clients

Attendant console versions

Attendant console versions

A specially equipped optiPoint 500 basic, optiPoint 500 standard, optiPoint 500 advance or op-

tiPoint 600 office can perform switching services for HiPath 3000/5000. This optiPoint Attendant

simultaneously serves as the intercept position. It is the destination for all incoming non-DID

calls and calls which the call-allocation algorithms are unable to route to users (intercept calls).

The attendant routes these calls to the correct destination.

Standard key assignment (default) for optiPoint Attendant

Figure 10-34

optiPoint 500 standard - Standard Key Assignment (Default) for optiPoint At-

Additional information can be found in the operating manual optiPoint Attendant for HiPath

3000/5000 which is contained on the "Electronic Operating Instructions" CD (see Section 1.6,

"Information on the Intranet": Electronic Documentation on Com ESY Products).

Number redial

Microphone on/off

HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual

Night service

Internal Phonebook

Queued calls

P31003-H3550-S403-4-7620, 02/05

Table of Contents