Figure 4-54 Hipath 3750 Wall Mounting For A Stacked Two-Cabinet System - Siemens HiPath 3000 Service Manual

Step
4. Bolt the swing-out assembly on the wall-mounting bracket to the back of each cab-
inet.
5. Close the swing-out assembly; Close the swing-out assembly and hang each brack-
et and cabinet on the top screws.
6. Swing the cabinet open and tighten the top screws completely.
7. Insert and fully tighten the bottom screws in the round holes.
8. Bolt the latching assembly to the opposite edge of each cabinet.
You can invert the wall brackets to have the cabinets swing out in the opposite direction.
Warning
7
Do not fasten power cords to building surfaces when mounting cabinets on the wall.
Wall Mounting (Stacked Two-cabinet System)
Figure 4-54 HiPath 3750 Wall Mounting for a Stacked Two-Cabinet System (for U.S. only)
P31003-H3550-S403-4-7620, 02/05
HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual
Installing HiPath 3750, HiPath 3700
Activity
inst_h3.fm
Installing HiPath 3000
4-99