Siemens HiPath 3000 Service Manual page 1017

Table A-3 Expert Mode Codes
Code
11
11 1
11 1 1
11 1 2
11 2
11 2 1
11 2 2
11 3
11 3 1
11 3 2
11 3 3
11 3 4
11 3 5
11 3 6
11 3 7
11 4
11 5
11 6
11 7
11 8
11 9
12
12 1
12 2
P31003-H3550-S403-4-7620, 02/05
HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual
System Programming Codes (Expert Mode Codes)
Call detail recording
CDR/station (call detail recording at station)
View CDR/station; enter station number
Print CDRS
CDR per trunk (call detail recording per trunk)
View CDR per trunk; select slot/trunk
Print CDRT
CDR central (call detail recording central)
Output format: 0 = compressed, 1 = long
Station number format, suppress digits: 0 = no, 1 = yes
Incoming calls: 0 = no, 1 = yes
Call duration 0 = no, 1 = yes
Output MSN: 0 = no, 1 = yes
Call charge display: 1 = Amount, 2 = Pulses
Outgoing without connection: 0 = no, 1 = yes
Call charge factor
Enter 0 % to 10000 %
ISDN factor
Enter 0 % to 10000 %
Currency, alphanumeric entry of max. 3 characters (not for U.S.)
Call log: 0 = no, 1 = yes
CDRA (call detail recording, attendant), pay phone, station.
Computing accuracy, decimal digits (0 to 3)
Speed dialing system
Speed dial numbers, external station numbers
000 to 999 (HiPath 3750, HiPath 3550, HiPath 3700, HiPath 3500);
000 to 299 (HiPath 3350, HiPath 3300)
Speed dial names, alphanumeric entries of up to 16 characters (optiset
E memory and optiPoint 600 office only), only if speed-dialing numbers
have been entered.
Function
pcodes.fm
A-3