Siemens HiPath 3000 Service Manual page 858

wclient.fm
Workpoint Clients
IP Telephony (Voice over IP)
Connection
The optiPoint 410 display module must always be installed as the first add-on device, in other
words, connected directly to the telephone.
The connection to the telephone is made over an interface cable with the following connectors:
input MW6, output MW8. The power supply is ensured via the connected telephone.
P31003-H3550-S403-4-7620, 02/05
10-62
HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual