Optipoint 500 Add-On Devices; Optipoint Key Module - Siemens HiPath 3000 Service Manual

Hide thumbs Also See for HiPath 3000:

Table of Contents

Workpoint Clients

optiPoint 500

optiPoint 500 Add-On Devices

The optiPoint key module and optiPoint BLF add-on devices increase the number of function

keys available.

The user usually installs the add-on devices. The installation instructions are on the "Electronic

Operating Instructions" CD.

Always disconnect the line cord before connecting add-on devices to the telephone.

Refer to the HiPath 3000/5000 Feature Description for model-specific data for the optiPoint key

module and the optiPoint BLF.

The optiPoint key module is an add-on device that should be mounted on the side of the tele-

phone; it provides an additional 16 keys, LEDs and labelling areas for all purposes. Figure 10-

9 shows the possible configurations.

Double assignment can be performed for the keys if only call numbers without LED support are

saved on the first level. It is also possible to program call numbers without LED support on the

second level. These can be internal station numbers, DID call numbers and call numbers from

a HiPath network (see also Page 10-4).

optiPoint Key Module

P31003-H3550-S403-4-7620, 02/05

HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual

Table of Contents