System Access Options - Siemens HiPath 3000 Service Manual

service.fm
Service
Security Features
12.6.1.3

System Access Options

The user's access rights, meaning the data that the user may read or manage, always depend
on the user group to which the user is assigned.
Service tools
Assistant T and Assistant TC systems
●
Log on by entering your user name and password (regardless of code lock)
The system can only be accessed using the first two U
SLMO/SLU board in the system.
HiPath 3000 Manager E and HiPath 3000 Manager C (local)
●
Log on by entering your user name and password
HiPath 3000 Manager E (remote), direct connection
●
Log on by entering your user name and password
The system can be accessed directly using the integrated digital modem (B channel) or the
integrated analog modem. However, the user is required to establish a 5 digit access code
beforehand.
HiPath 3000 Manager E (remote), callback connection
●
Log on by entering your user name and password
The system can be accessed using the integrated digital modem (B channel) or the inte-
grated analog modem. However, you have to set up a callback index beforehand.
HiPath Software Manager
●
Log on by entering your user name and password
AMHOST
The AMHOST (Administration and Maintenance via HOST) feature allows Plus products to
read certain system information and to change it, if necessary. To enable Plus products to ac-
cess the system, you have to set up a user without a user group in the HiPath 3000 default user
administration. Enter "AMHOST" as the user name and "77777" as the default user password.
You can only change this password if the system is configured using a variable password. In
this case, delete the "AMHOST" user and re-configure the system with the same user name
and a new password.
12-84
connections from the first
P0/E
P31003-H3550-S403-4-7620, 02/05
HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual