Table 4-4 Maximum Number Of Time-Division Multiplex Channels Required - Siemens HiPath 3000 Service Manual

Time-division multiplex channels for peripheral boards
The following table lists the number of time-division multiplex channels that the different boards
require.
Table 4-4 Maximum Number of Time-Division Multiplex Channels Required Per Board
Board
DIU2U
DIUN2
IVMN8
IVMNL
SLCN
SLMA
SLMA8
SLMO2
SLMO8
STMD3
STMI2
4
STMI2 + PDMX
TM2LP
TMC16
TMDID
TMEW2
1 A time-division multiplex channel is required if a call is being conducted over the "home SLCN board" of a mobile tele-
phone. If a call is being conducted over a "Current location SLCN board", additional time-division multiplex channels will
be required. More information is provided in Section 11.6, "Multi-SLC and System-Wide Networking".
2 The current number of time-division multiplex channels required is determined by the number of active stations.
3 The maximum number of masters and slaves possible is taken into consideration.
4 PDMX is not currently released.
P31003-H3550-S403-4-7620, 02/05
HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual
Maximum number of time-division multiplex channels re-
Installing HiPath 3000
Installing HiPath 3800
quired
60
60
8
24
1
64
2
24
2
8
2 3
48
2 3
16
16
32
64
8
16
8
4
inst_h3.fm
4-47