Power Supplies; Peripheral Boards - Siemens HiPath 3000 Service Manual

service.fm
Service
Guided Maintenance
MPPI, UAM (only with HiPath 3550, HiPath 3350) or UAMR (only with HiPath 3500, HiPath
●
3300)
The availability of one of these Announcement and Music Modules is displayed as
"Option 5".
The ALUM4 module cannot be displayed.
12.3.1.1.2

Power Supplies

Table 12-3 Power Supply Status Displays
Board
HiPath 3800
LUNA2
HiPath 3750, HiPath 3700
UPSM
HiPath 3550, HiPath 3350, HiPath 3500, HiPath 3300
PSUP
UPSC-D, UPSC-DR
12.3.1.1.3

Peripheral Boards

Viewing peripheral board status
You can use HiPath 3000 Manager E or Assistant T to view the status of all peripheral boards.
Display is limited to the following statuses per board:
Board not inserted
●
Board defective (not loaded)
●
Board disabled
●
Board enabled (active)
●
Board busy (at least one station or line from this board is disconnected, is being called, or
●
is busy).
12-24
The LED displays the operating status (on or off).
The LED displays the operating status (on or off).
The LED displays the 5-V output voltage.
A green LED displays the 5-V output voltage.
●
A yellow LED displays the additional power of –48-V output volt-
●
age provided by an external power supply unit (EPSU2 or
EPSU2R).
Status Display
P31003-H3550-S403-4-7620, 02/05
HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual