Siemens HiPath 3000 Service Manual page 972

service.fm
Service
Guided Maintenance
Table 12-7 HiPath 3000 Class B Error Messages
No.
22 HiPath License Management: License
Failure Period was stopped. System in li-
censing default
Error Class B-20 - Call Processing
0 Error in pointer administration
1 Maximum number of stations achieved
2 RS232: Interface not present (DSR)
11 RS232: Interface ready (DSR)
13 All routes allocated
Error Class B-21 - Device Handler
0 No dial tone detected
1 Dial tone detected
7 Reference clock on
8 Reference clock off
11 Fan alarm (19'' housing for HiPath 3500/
HiPath 3300): Error
12 Fan alarm (19'' housing for HiPath 3500/
HiPath 3300): Error corrected
13 No response from temperature sensor in
the 19'' housing for HiPath 3500/HiPath
3300
12-54
Meaning Action
Recovery
Hard restart Notify appropriate service
–
–
–
Hard restart Notify appropriate service
– Use headset to check dial
If there is no dial tone, re-
–
–
–
– Check to see if the fan has
broken down and/or if the
ventilation openings in the
–
–
P31003-H3550-S403-4-7620, 02/05
HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual
Action
Technician
Check licensing
support
Reduce stations
Check interface
–
support
tone.
place board.
–
–
–
housing are unblocked.
–
Replace CBRC