Slma, Slma8; Figure 3-70 Slma/Slma8 - Leds On The Front Panel - Siemens HiPath 3000 Service Manual

3.3.13

SLMA, SLMA8

Introduction
The SLMA and SLMA8 (Subscriber Line Module Analog) boards provide analog T/R interfaces
for use in HiPath 3800:
SLMA (S30810-Q2191-C300) = 24 analog T/R interfaces
●
SLMA8 (S30810-Q2191-C100) = eight analog T/R interfaces
●
The boards generate their own ring voltages and do not require an external ring generator.
For Australia only: The ring voltage is 35 V
>
ed, we cannot exclude the possibility of errors occurring during ringing state.
Front panel
Two LEDs indicating the board status:
LED (red)
●
LED (green)
●
Figure 3-70 SLMA/SLMA8 - LEDs on the Front Panel
To ensure sufficient shielding, provide the board with a shielding panel. For informa-
>
tion on mounting the shielding panel, see Section 4.2.5.2.
P31003-H3550-S403-4-7620, 02/05
HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual
Boards for HiPath 3000
. Depending on the terminals connect-
eff
boards.fm
Peripheral Boards
3-163