Siemens HiPath 3000 Service Manual page 366

boards.fm
Boards for HiPath 3000
Peripheral Boards
LED statuses and their meanings
H1 (red) and H2 (green) LEDs
●
Table 3-146
Red LED Green
LED
Off
On
Flashing
Off
Off Flashing At least one subscriber line circuit is acti-
H3 LED (see Figure 3-121): Reference clock display (clock is generated if this feature was
●
configured using HiPath 3000 Manager E).
– On: Reference clock for clock generator is created.
– Off: No reference clock
3-300
TMS2 (Not for U.S.) - LED Statuses
Off Board not receiving power or not
plugged in correctly.
Board is out of order.
Off Board is receiving power and board test
is in progress.
Board is defective if status remains un-
changed (board test unsuccessful).
Loadware loading not successfully com-
pleted. Board is faulty.
Error detected on board.
Board is deactivated (not applicable to
errors detected by test loops) or board
was deactivated using HiPath 3000 Man-
ager E.
Off Loadware is being loaded.
On Board test completed successfully.
Board is OK (idle state).
vated.
Status
HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual
Action
Check plug contact on
board.
Replace board.
Replace board.
Check whether the
board was deactivated
using HiPath 3000 Man-
ager E. If not, replace
board.
P31003-H3550-S403-4-7620, 02/05