Siemens HiPath 3000 Service Manual page 569

Table 4-15 Jack Assignment on the "8-Slot" Backplane
Connec- Cabinet
tor
X98 EC1
EC2
X29 - X89 All
X99 EC1
EC2
Connection cables between the "8-slot" basic and expansion cabinets
If installing a multi-cabinet system, you must also connect the cables between the BC and ECs.
If
Two-cabinet Connect BC to EC1 = 2 cables (S30267-Z178-A13)
System (see Figure 4-78)
Three-cabi-
●
net
●
System (see Figure 4-79)
P31003-H3550-S403-4-7620, 02/05
HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual
1 SU connector each (16 TW) to the patch panel
1 SU connector each (8 TW) to the patch panel (not for S
1 SU connector each (8 TW) to the patch panel (not for S
Connect BC to EC1 = 2 cables (S30267-Z178-A13)
Connect BC to EC2 = 2 cables (S30267-Z178-A13)
Installing HiPath 3000
Installing HiPath 3750, HiPath 3700
Function
Then
inst_h3.fm
)
2M
)
2M
4-139