6.10.2.2
Adding Individual Nodes for IP Networking
The next steps in creating a central database for IP Networking are the registration of the indi-
vidual nodes and the transfer of the node data to the server net file. The server net file is now
loaded to the Feature server. The customer database is then automatically distributed to the
various nodes.
The prerequisite for adding nodes (HiPath 3000) to a HiPath 3000/5000 network is the success-
ful installation (see Chapter 4, "Installing HiPath 3000") and startup (see Chapter 5, "Start-
ing Up HiPath 3000") of these systems.
Procedure
1.
To select the node to be added to the CDB, call File - HiPath 5000/AllServe - New - HiPath
3000.
2.
The Enter Source dialog appears.
3.
Select the appropriate source:
Customer database file
●
To open a saved CDB file.
create offline
●
An offline generated CDB is created.
P31003-H3550-S403-4-7620, 02/05
HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual
HiPath 5000 Startup and Administration
Perform HiPath 5000 Basic Configuration
start_h5.fm
6-51