Siemens HiPath 3000 Service Manual page 892

wclient.fm
Workpoint Clients
Attendant console versions
Connection variants for Microsoft operating systems
optiset E control adapters
Integrated USB interface (optiPoint 500 and optiPoint 600
office)
TCP/IP via HG 1500
Additional Microsoft operating systems are not supported.
System requirements
If the licensing components - Customer License Agent (CLA) and Customer License
>
Manager (CLM) - are to be installed on the same PC, their system requirements are
also to be taken into account.
Pentium III 750 MHz or higher
●
Min. 128 MB RAM (memory)
●
Graphics resolution min. 1024 x 768 pixels
●
Sound card with speaker for ringer signaling
●
In the case of Windows
via the sound card: SelectStart/Settings/Control Panel/Sounds and Multi-
media/Sounds and activate "Only use preferred devices".
Microsoft-compatible mouse
●
CD-ROM or DVD drive
●
Min. 40 MB free hard disk memory
●
®
Windows 2000 or Windows
●
For operation with a TCP/IP connection: Functional operating system with network and
●
sound card configured
For operation on USB: optiPoint 500 telephone or optiPoint 600 office with free USB inter-
●
face, USB cable (part number S30267-Z360-A30-1), USB driver (Call-Bridge TU software)
and a free USB port on the PC.
For operation using optiset E control adapters: optiset E telephone with free adapter slot
●
and a free port on the PC (COM port 1-4).
10-96
Connection variant
®
2000, the following configuration must be carried out for signaling
®
XP operating system
Windows
Yes
Yes
Yes
P31003-H3550-S403-4-7620, 02/05
HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual
® ®
2000 Windows
Yes
Yes
Yes
XP