Safety Information: Dangers - Siemens HiPath 3000 Service Manual

inform.fm
Important Information
Safety Information
1.4.1

Safety Information: Dangers

Grounding
Never operate systems that require a ground wire connection without a ground wire connected.
Connect the system to the ground wire correctly before starting up and connecting the stations.
Connecting an external battery pack, external batteries
Only use licensed battery packs and batteries.
HiPath 3500 and HiPath 3300 systems
Potentially hazardous circuits are accessible in HiPath 3500 and HiPath 3300 19" systems.
These systems should therefore only be operated with closed housing.
Dangerous voltages
Voltages above 30 Vac (alternating current) or 60 Vdc (direct current) are dangerous.
Damage
Replace the power cable immediately if it shows any signs of damage.
●
Replace any damaged safety equipment (covers, labels and protective cables) immediate-
●
ly.
Accessories
Use only original accessories or components approved for the system. Failure to observe these
instructions may damage the equipment or even violate safety and EMC regulations.
System shutdown during maintenance work
Procedures to be observed are described in the relevant chapters.
1-6
P31003-H3550-S403-4-7620, 02/05
HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual