Siemens HiPath 3000 Service Manual page 765

Table 9-2 Startup Rules for Inserting and Removing Boards
If
Replacing with a dif-
ferent board type
P31003-H3550-S403-4-7620, 02/05
HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual
The system does not automatically activate the board.
After removing the old board, you can delete it from the database us-
ing HiPath 3000 Manager E or Assistant T.
After you have inserted the new board, the system activates it as if it
had been inserted into a free slot. However, the CDB area used by the
old board is left as a gap.
In the case of subscriber line modules, you can use HiPath 3000 Man-
ager E to retain the old station data by copying it to the new board, or
you can delete it and reset the default state. Copying is not possible
for trunk boards.
Expanding and Upgrading HiPath 3000
Expanding HiPath 3000
Then
exup.fm
9-5