Siemens HiPath 3000 Service Manual page 599

Procedure for mounting the MDFU on the wall
Step
1. Use the template to drill the holes.
2. Insert the wall anchors and screw in the screws, leaving 5 mm projecting.
3. Remove the housing cover and mount the MDFU-E on the brackets.
4. Tighten the screws through the holes.
Layout and dimensions of the MDFU
1
2
3
4
5
6
7
8
9
Special built-in comps.
Figure 4-94 MDFU - Layout and Dimensions (367.0 x 328.8 x 125.4 mm) (not for U.S.)
P31003-H3550-S403-4-7620, 02/05
HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual
Installing HiPath 3550, HiPath 3350, HiPath 3500, and HiPath 3300
9 slots (9 x 30 mm)
2 x PFT1
or
1 x PFT4
System side
Activity
328.8
Installing HiPath 3000
Jumpering
Channel
Line network
inst_h3.fm
4-169