Unpacking The Components; Not For U.s.: Mounting The Main Distribution Frame (Hipath 3550 Only) - Siemens HiPath 3000 Service Manual

Hide thumbs Also See for HiPath 3000:

Table of Contents

Installing HiPath 3000

Installing HiPath 3550, HiPath 3350, HiPath 3500, and HiPath 3300

Unpacking the Components

Compare the components with the packing slip or customer receipt to make sure

that they are correct and complete.

Determine whether any damage has occurred during transport and report it to the

proper departments.

Dispose of the packing materials properly.

Only use tools and equipment that are in perfect condition. Do not use equipment

with visible damage.

Introduction

MDFU is the main distribution frame used (see Figure 4-94).

Installation notes

The MDFU-E main distribution frame should be installed in the direct vicinity of the system

(note length of connection cable) and at eye level. Mount it on the wall according to the instruc-

tions that came with it. The bag attached to the cover contains a drill template. It also contains

the necessary screws and wall anchors for attaching the MDF to the wall.

The MDFU must be grounded. Refer to Section 4.4.3.6 for an explanation of the procedure.

P31003-H3550-S403-4-7620, 02/05

HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual

Table of Contents