exup.fm
Expanding and Upgrading HiPath 3000
Expanding HiPath 3000
9.2.5
Connecting Special Equipment
9.2.5.1
Entrance Telephones
Connection options
Connection via ET (entrance telephone) adapter and amplifier
HiPath 3000
Connection over ET/V adapter
HiPath 3000
Figure 9-10
Connection Options for Entrance Telephones
The new central control boards
>
Q2935-Z301) only support TFE-S-Adapter S30122-K7696-T313.
You can also make a direct connection if needed. In this case, only voice connections to the
entrance telephone are possible, without the support of the opener and signal functions.
Amplifier
Figure 9-11
Direct Connection of Entrance Telephones
9-24
ET adapter
ET/V–
adapter
CBCC
if necessary, loop in a capacitor
1 µF/250 V for each
a
b
Amplifier
(S30810-Q2935-A301) and
to the T/R analog port
P31003-H3550-S403-4-7620, 02/05
HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual
Door
Door
CBRC
(S30810-