10.6.1.4.3
Possible Configurations for the Add-On Devices
The following table shows the possible configurations for add-on devices on telephones from
the optiPoint 410 and optiPoint 420 families (not optiPoint 410 entry, optiPoint 410 economy,
optiPoint 420 economy and optiPoint 420 economy plus).
Table 10-6
Add-On Device Configuration at an optiPoint 410 and optiPoint 420 Telephone
optiPoint 410 telephone
optiPoint 420 telephone
optiPoint 410 standard
optiPoint 410 advance
optiPoint 420 standard
optiPoint 420 advance
1
Configuration with two optiPoint BLFs only with HiPath 3800, HiPath 3750, and HiPath 3700
10.6.1.5
Use of optiPoint 500 Adapters
The following optiPoint 500 adapters are available for use on telephones from the optiPoint 410
and optiPoint 420 families (not optiPoint 410 entry, optiPoint 410 economy optiPoint 420 econ-
omy and optiPoint 420 economy plus):
optiPoint Acoustic Adapter
●
Note: Floating contacts are not supported when using the adapter on optiPoint 410 and op-
tiPoint 420.
optiPoint Recorder Adapter
●
P31003-H3550-S403-4-7620, 02/05
HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual
1st add-on device
optiPoint key module
optiPoint key module
optiPoint key module
optiPoint 410 display module –
optiPoint 410 display module optiPoint key module
optiPoint 410 display module optiPoint BLF
optiPoint 410 display module optiPoint SLK module
optiPoint BLF
optiPoint BLF
optiPoint SLK module
optiPoint SLK module
Workpoint Clients
IP Telephony (Voice over IP)
2nd add-on device
–
optiPoint key module
optiPoint BLF
–
1
optiPoint BLF
–
optiPoint SLK module
wclient.fm
10-63