For U.s. Only: Mounting Two Cabinets Stacked On The Wall; Figure 4-53 Hipath 3750 - Wall-Mount Kit (For U.s. Only) - Siemens HiPath 3000 Service Manual

Hide thumbs Also See for HiPath 3000:

Table of Contents

Installing HiPath 3000

Installing HiPath 3750, HiPath 3700

For U.S. only: Mounting Two Cabinets Stacked on the Wall

You can mount two cabinets stacked on the wall using the wall-mount kit.

The second cabinet also requires an earth ground as described on

Section 4.3.3.5.2. Do not fasten wall-mounted cabinets with the connecting plates,

as this will interfere with the earth ground.

Wall-Mount Kit

Latching assembly

HiPath 3750 - Wall-Mount Kit (for U.S. only)

Install a plywood backboard at least 0.75 in. (19.05 mm) thick.

Use the wall-mounting bracket as a template to drill three holes in the backboard.

Use the keyed holes in the top of the bracket and the round hole in the bottom of the

Install the screws in the top two holes for each bracket, tightening them until 0.25 in.

(6.35 mm) is protruding.

Bracket for wall mounting

Swing-out component

HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual

P31003-H3550-S403-4-7620, 02/05

Table of Contents