Optipoint Blf; Figure 10-8 Optipoint Blf - Siemens HiPath 3000 Service Manual

Hide thumbs Also See for HiPath 3000:

Table of Contents

optiPoint BLF

This is an add-on device that provides 90 additional keys, LEDs and labeling areas for all pur-

The device is connected to the telephone or to an optiPoint key module over an interface cable

with the following connectors: input MW6, output MW8. Figure 10-9 shows the possible config-

Power is supplied using a power supply unit (see Section 10.7.1.1) that can supply power to up

to two optiPoint BLFs. The power supply unit must be plugged directly into the designated op-

tiPoint BLF port.

optiPoint BLF

P31003-H3550-S403-4-7620, 02/05

HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual

Workpoint Clients

optiPoint 500

Table of Contents