Configuration Notes - Siemens HiPath 3000 Service Manual

inst_h3.fm
Installing HiPath 3000
Installing HiPath 3750, HiPath 3700
4.3.6

Configuration notes

Introduction
The cabinet/cabinets is/are already equipped with the boards needed for the customer-specific
requirements when the system is delivered.
Board slots in "8-slot" cabinets
Nine board slots are available in each cabinet. The following boards are assigned permanent
slots:
CBCPR central processor board -> slot 01 in the BC
●
UPSM power supply unit -> slot 09 in the BC, slot 18 in EC1, slot 27 in EC2.
●
Depending on their width, peripheral boards can be inserted in slots 02 to 08 in the BC, 10 to
17 in EC1 and 19 to 26 in EC2 (the adhesive label beneath each slot identifies the slot) (see
Figure 4-87).
4-152
P31003-H3550-S403-4-7620, 02/05
HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual