Siemens HiPath 3000 Service Manual page 362

boards.fm
Boards for HiPath 3000
Peripheral Boards
LED statuses and their meanings
Table 3-143 TMST1 (for U.S. only) - LED Statuses
Red LED Green
LED
Off Off
On Off
Flashing Off
Off On
Off Flashing At least one subscriber line circuit is activat-
On On
3-296
Status
Board not receiving power or not plugged in
correctly.
Board is out of order.
Board is receiving power and board test is
in progress.
Board is defective if status remains un-
changed (board test unsuccessful).
Loadware loading not successfully com-
pleted. Board is faulty.
Error detected on board.
Board is deactivated (not applicable to er-
rors detected by test loops) or board was
deactivated using HiPath 3000 Manager E.
Loadware is being loaded.
Board test completed successfully. Board is
OK (idle state).
ed.
Board error
Check plug contact on
board.
Replace board.
Replace board.
Check whether the board
was deactivated using Hi-
Path 3000 Manager E. If
not, replace board.
Replace board.
P31003-H3550-S403-4-7620, 02/05
HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual
Activity