Installing Hipath Comscendo Service - Siemens HiPath 3000 Service Manual

Hide thumbs Also See for HiPath 3000:

Table of Contents

Installing HiPath ComScendo Service

The HiPath ComScendo Service is virtually a complete HiPath 3000 node that is only config-

ured as software on a PC. Apart from TDM-specific features (e.g. the connection of U

tions, trunks and special stations such as door openers, etc.), all V5.0 features are available.

The HiPath ComScendo Service is administered over HiPath 3000 Manager E, while the

HG 1500 resources (see Page 10-38) are administered over Web-based Management (WBM).

The HiPath ComScendo service is not a standard component (default setup) of the master set-

up. For this reason, the procedure for a separate installation will be described here.

Insert the installation CD.

The installation program is started via the autorun function. Alternatively you can initiate

Setup via Windows Explorer under <CD-ROM drive letter>:\setup.exe.

Select the language you require for the Setup browser. German (Germany) and English

(USA) versions are currently available.

The system is prepared for installation.

Click Next to start the installation routine.

Important installation information is displayed.

This includes the latest information on installation. Please read this information carefully.

Click Next to proceed with the installation routine.

Select destination path.

Select the folder where you want to install the program.

Confirm the default folder c:\program files\siemens\hipath\ with Next or click

Browse and select a different folder.

Select program folder.

Select the location where the setup should create the new shortcuts.

Confirm the default folder HiPath with Next or select a different folder.

P31003-H3550-S403-4-7620, 02/05

HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual

HiPath 5000 Startup and Administration

Table of Contents