Table 5-9 Startup Procedure; Starting Up Hipath 3550, Hipath 3350, Hipath 3500, Hipath 3300 - Siemens HiPath 3000 Service Manual

5.4

Starting Up HiPath 3550, HiPath 3350, HiPath 3500, HiPath 3300

This section contains information on how to start up the HiPath 3550, HiPath 3350, HiPath 3500
and HiPath 3300 communication systems.
Warning
7
Only authorized service personnel should start up the system.
Caution
7
For safety, operate HiPath 3500 and HiPath 3300 only with the housing front closed.
Always use dummy panels (C39165-A7027-B115) to close slots that are not
equipped with boards.
5.4.1 Startup Procedure
Table 5-9 Startup Procedure
Step
1. Supplying the System With Power, page 5-20 (starting system boot).
2. Carrying Out a System Reload, page 5-23
3. Carrying Out the Country Initialization and Selecting the Password Type, page 5-
23
4. Not for U.S.: Entering the System Number, page 5-25
5. Customer-Specific Programming, page 5-26
6. Performing a System Check, page 5-26
P31003-H3550-S403-4-7620, 02/05
HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual
Starting Up HiPath 3550, HiPath 3350, HiPath 3500, HiPath 3300
Startup Activity (Remarks)
start_h3.fm
Starting Up HiPath 3000
5-19