Siemens HiPath 3000 Service Manual page 700

start_h5.fm
HiPath 5000 Startup and Administration
Optimizing Operating System Settings
Table 6-7 Operating System Settings for HiPath 5000
Component
Application protocol
6-46
The Personal Call Manager software runs within the context of the IIS
user. When a Windows Server system is being installed for the first
time, it must be taken into account that the default security settings
for the wwwroot directory do not always grant the Personal Call
Manager the necessary access rights.
You must ensure that the user account used by the Personal Call
Manager (account for "anonymous access" on the standard website
- by default this is the IIS guest account IUSR_<PC name>) has full
access to the wwwroott\PCM directory.
The PCM requires the following local full access rights to the hard
disk: C:\temp and C:\InetPub\wwwroot\PCM\ where C:\In-
etPub\wwwroot means the standard directory of the IIS (in other
installations this may have a completely different name).
The option "Cache ISAPI Applications" must not be disabled. This
option can be found under Standard website – Properties – Home
Directory – Configuration – Application Mapping.
If the option were disabled, the Personal Call Manger would lose its
"memory" of the users currently logged on and the error message
"You are not logged on" would be displayed permanently ...".
Configure the following by right-clicking Properties under System
Log and Application Log in the operating system's Event Viewer:
'Overwrite events as needed' and set 'Maximum log size' to approxi-
mately 2 MB.
Description
P31003-H3550-S403-4-7620, 02/05
HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual