Cma; Figure 3-6 Cma With Spacing Bolts - Siemens HiPath 3000 Service Manual

3.2.5

CMA

Caution
7
Place the central control board on a flat surface before inserting the CMA subboard.
The spacing bolts supplied guarantee the correct insertion of the subboard, so you
should always mount them (see Figure 3-6).
Otherwise you may damage the board.
Figure 3-6 CMA with Spacing Bolts
Introduction
The Clock Module ADPCM CMA (S30807-Q6931-X) is an optional subboard for the
CBRC central control boards. The CMA module is needed for special HiPath Cordless Office
configurations.
All clock module small (CMS) functions are available when you insert a CMA module.
Please refer to Page 3-40 for recommendations on CMA module implementation.
P31003-H3550-S403-4-7620, 02/05
HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual
Boards for HiPath 3000
Central Boards
Spacing bolts
boards.fm
CBCC and
3-39